Cáp PUR dài 6m có đầu nối M12 male 0° A-cod. MSUD valve plug C - header

Cáp PUR dài 6m có đầu nối

  • M12 male 0° A-coded + MSUD valve plug C-8mm
  • Cáp PUR 3×0.75 mm², dài 6m
  • UL/CSA approved
  • Dùng cho drag chain và robot

Cáp PUR dài 6m có đầu nối M12 male 0° A-cod. / MSUD valve plug C-8mm 7000-41081-6260600 của Murrelektronik

Cáp PUR dài 6m có đầu nối M12 male 0° A-cod. MSUD valve plug C - chi tiết

  • M12 male 0° A-coded + MSUD valve plug C-8mm
  • Cáp PUR 3×0.75 mm², dài 6m
  • UL/CSA approved
  • Ứng dụng trong drag chain, robot
  • Màu đen (bk)
  • Field-wireable

Sản phẩm khác

Cable length 6,00 m

Side 1

Family construction form M12
No. of poles 3
Coding A
Mounting method inserted, screwed
Threaded hole M12 x 1
Tightening torque 0,6 Nm
Width across flats SW13
suitable for corrugated tube (internal Ø) 10 mm
Degree of protection (EN IEC 60529) IP67

Side 2

Family construction form Valve connector form C
No. of poles 4
Threaded hole M2.5
Tightening torque 0,4 Nm
Degree of protection (EN IEC 60529) IP67

Electrical data

Drop-out delay time max. 20 ms

Electrical data | Supply

Operating voltage AC 24 V
Operating voltage AC min. 19,2 V
Operating voltage AC max. 28,8 V
Operating voltage DC 24 V
Operating voltage DC min. 18 V
Operating voltage DC max. 30 V
Current operating per contact max. 4 A
Cut-off peak voltage max. 55 V

Diagnostics

Status indication LED yellow

Device protection | Electrical

Additional condition protection degree inserted, screwed
Pollution Degree 3
Additional suppressor Z-Diode
Rated surge voltage 0,8 kV
Material group (IEC 60664-1) I

Mechanical data | Material data

housing Plastic
Color housing black
Locking material Zinc die-casting
Coating locking Nickeled

Mechanical data | Mounting data

Mounting method inserted, screwed

Environmental characteristics | Climatic

Operating temperature min. -25 °C
Operating temperature max. 85 °C
Additional condition temperature range depending on cable quality

Important installation notes

Note on bending radius Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
Note on strain relief Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.

Conformity

Product standard EN IEC 61076-2-101 (M12), EN 175301-803 (valve plug)

 

Datasheet