– Đầu nối 7/8” female 0°
– Cáp PUR 5×1.5, dài 2 mét
– Drag chain
Cáp nguồn dài 2m có đầu nối 7/8″ female 0° 5 chân 7000-78021-9610200 của Murrelektronik là cáp nguồn PUR 5×1.5 có 1 đầu nối cái 7/8, chuẩn UL/CSA + drag chain
Đặc điểm:
| Cable length | 2,00 m |
Side 1-1
| Family construction form | 7/8″ |
| No. of poles | 5 |
| Gender | Female |
| Mounting method | Inserted, Screwed |
| Thread | 7/8″ |
| Tightening torque | 1.5 Nm |
| Width across flats | SW 22 |
| Cable outlet | straight |
| Degree of protection (EN IEC 60529) | IP67 |
Side 2-2
| Family construction form | free cable end |
Electrical data | Supply
| Current operating per contact max. | 12 A |
| Current phase – neutral | 230 V |
| Current phase – phase | 400 V |
Installation | Connection
| Tightening torque | 1.5 Nm |
Device protection | Electrical
| Degree of protection (EN IEC 60529) | IP67 |
| Additional condition degree of protection | Inserted, Screwed |
| Pollution degree | 3 |
| Rated surge voltage | 3 kV |
| Insulating material group (IEC 60664-1) | I |
Mechanical data | Material data
| Screw connection | Zinc die-casting |
| Coating of fitting | Nickel plated |
Mechanical data | Mounting data
| Mounting method | Inserted, Screwed, Shaking protection |
Environmental characteristics | Climatic
| Operating temperature min. | -25 °C |
| Operating temperature max. | 85 °C |
| Additional condition temperature range | Depending on connected cable |
Important installation notes
| Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
| Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
