Cáp nguồn 2 đầu nối 7per8 - 7per8 7000-50021-9610100 - header

Cáp nguồn 2 đầu nối 7/8″ male 0° – 7/8″ female 0°

– 2 đầu nối 7/8″, thẳng
– Cáp PUR 5×1.5, dài 1 mét
– Dùng cho drag chain

Cáp nguồn 2 đầu nối 7/8″ male 0° – 7/8″ female 0° 7000-50021-9610100 của Murrelektronik là cáp nguồn bọc PUR 5×1.5, màu xám, dài 1m, chuẩn UL/CSA + drag chain

Cáp nguồn 2 đầu nối 7per8 - 7per8 7000-50021-9610100 - detail1

Đặc điểm:

  • Đầu nối: 7/8″ male 0° – 7/8″ female 0°
  • Cáp PUR 5×1.5 mm², màu xám
  • Chiều dài cáp: 1 mét

Cáp nguồn 2 đầu nối 7per8 - 7per8 7000-50021-9610100 - detail2

  • Chuẩn: UL/CSA + drag chain

Cáp có đầu nối

Cable length 1,00 m

Side 1-1

Family construction form 7/8″
No. of poles 5
Gender male
Mounting method inserted, screwed
Thread 7/8″
Tightening torque 1.5 Nm
Width across flats SW22
Cable outlet straight
Suitable for corrugated tube (internal Ø) 15.8 mm
Degree of protection (EN IEC 60529) IP67

Side 2-2

Family construction form 7/8″
No. of poles 5
Gender female
Mounting method inserted, screwed
Thread 7/8″
Tightening torque 1.5 Nm
Width across flats SW22
Cable outlet straight
Suitable for corrugated tube (internal Ø) 15.8 mm
Degree of protection (EN IEC 60529) IP67

Electrical data | Supply

Current operating per contact max. 10 A
Current phase – neutral 230 V
Current phase – phase 400 V

Device protection | Electrical

Degree of protection (EN IEC 60529) IP67
Additional condition degree of protection inserted, screwed
Rated surge voltage 3 kV
Insulating material group (IEC 60664-1) I

Mechanical data | Material data

Screw connection Zinc die-casting
Locking material Zinc die-casting
Coating locking nickel plated

Mechanical data | Mounting data

Mounting method inserted, screwed, Shaking protection

Environmental characteristics | Climatic

Operating temperature min. -25 °C
Operating temperature max. 85 °C
Additional condition temperature range depending on cable quality

Important installation notes

Note on bending radius Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
Note on strain relief Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.

 

Datasheet