Đầu nối Y M12 male 2x valve plug A-18mm - header

Đầu nối Y M12 male / 2x valve plug A-18mm 7000-42401-6160060

  • Y-Distributor: Kết nối M12 male sang 2 đầu nối van.
  • Cáp PVC 3×0.75 bk: Dài 0.6m.
  • Tương thích A-18mm: Dùng cho van điện từ.
  • Công nghiệp: Chịu môi trường khắc nghiệt.

Đầu nối Y M12 male / 2x valve plug A-18mm 7000-42401-6160060 với cáp PVC 3×0.75 bk dài 0.6m là giải pháp phân nhánh tín hiệu van điện từ hiệu quả

Đầu nối Y M12 male 2x valve plug A-18mm - body 1

  • Y-Distributor: Kết nối M12 male sang 2 đầu nối van.
  • Cáp PVC 3×0.75 bk: Dài 0.6m.
  • Tương thích A-18mm: Dùng cho van điện từ.
  • Công nghiệp: Chịu môi trường khắc nghiệt.

Đầu nối Y M12 male 2x valve plug A-18mm - body 2

Sản phẩm khác

Thông số kỹ thuật

Cable length 0,60 m

Side 1

Family construction form Valve connector form CI
No. of poles 4
Coding A
Gender male
Mounting method inserted, screwed
Threaded hole M12 x 1
Tightening torque 0,4 Nm
Width across flats SW13
Cable outlet straight
Material PBT
Material contact Copper alloy
Coating contact silver-plated

Side 2

Family construction form Valve connector form CI
No. of poles 4
Mounting method inserted, screwed
Threaded hole M12 x 1
Tightening torque 0,4 Nm
Material PBT
Coating contact silver-plated

Side 3

Family construction form M12
No. of poles 4
Coding A
Gender male
Mounting method inserted, screwed
Threaded hole M3x31
Tightening torque 0,6 Nm
Width across flats SW13
Cable outlet straight
Material PUR
Coating contact gold plated

Electrical data | Supply

Operating voltage AC 24 V
Operating voltage AC min. 19,2 V
Operating voltage AC max. 28,8 V
Operating voltage DC 24 V
Operating voltage DC min. 18 V
Operating voltage DC max. 30 V
Current operating per contact max. 4 A
Cut-off peak voltage max. 55 V
Current consumption max. 15 mA

Diagnostics

Status indication LED yellow

Device protection | Electrical

Degree of protection (EN IEC 60529) IP67
Additional condition protection degree inserted, screwed
Pollution Degree 3
Additional suppressor Diode, Z-Diode
Rated surge voltage 0,8 kV
Material group (IEC 60664-1) I

Mechanical data

Contour for corrugated hose without

Mechanical data | Material data

Locking material Zinc die-casting
Coating locking Nickeled
Gasket PUR

Mechanical data | Mounting data

Mounting method inserted, screwed

Environmental characteristics | Climatic

Operating temperature min. -25 °C
Operating temperature max. 85 °C
Additional condition temperature range depending on cable quality

Important installation notes

Note on bending radius Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
Note on strain relief Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.

Conformity

Product standard EN IEC 61076-2-101 (M12)

 

Datasheet