Đầu nối nguồn M12 male 0° L-code 5 chân 7000-P4591-0000000
– Là đầu nối thẳng, M12
– Male (đực), 5 chân, L-cod
– Loại đấu dây bằng vít
– IP67
Đầu nối nguồn M12 male 0° L-code 5 chân 7000-P4591-0000000: là một đầu nối công nghiệp kiểu tròn M12 dùng để kết nối nguồn đến thiết bị
– 5-pol., max. 2,5mm², 8 – 13mm
– Screw terminals
– Vỏ nhựa có khả năng chống hóa chất và dầu tốt
Sản phẩm tương tự – Đầu nối nguồn M12 female 0° L-code 5 chân 7000-P4611-0000000
Thông số kỹ thuật – Đầu nối nguồn M12 male 0° L-code 5 chân 7000-P4591-0000000
| Material short text | MSWAL-U-SK max. 2.5mm² |
|---|
| Family construction form | M12P |
|---|---|
| No. of poles | 5 |
| Coding | L |
| Gender | male |
| Mounting method | inserted, screwed |
| Thread | M12 x 1 |
| Cable outlet | straight |
| Material contact | Copper alloy |
| Mounting method | field-wireable |
|---|
| Operating voltage AC max. | 63 V |
|---|---|
| Operating voltage DC max. | 63 V |
| Current operating per contact max. | 16 A |
| Status indication LED | no |
|---|
| Cross section connection with wire end ferrule max. | 1.5 mm² |
|---|---|
| Cross section connection with wire end ferrule AWG max. | 16 AWG |
| Cross section connection without wire end ferrule max. | 2.5 mm² |
| Cross section connection without wire end ferrule AWG max. | 14 AWG |
| AWG number max. | 14 |
| Connection | Screw terminals SK |
|---|---|
| Mounting set | M12 x 1 |
| Mating cycles min. | 100 |
| Degree of protection (EN IEC 60529) | IP67 |
|---|---|
| Additional condition protection degree | inserted, screwed |
| Pollution Degree | 3 |
| Overvoltage category (EN 60950-1) | III |
| Rated surge voltage | 1.5 kV |
| Material group (IEC 60664-1) | II |
| Material housing | PA |
|---|---|
| Material contact carrier | PA |
| Coating contact | gold plated |
| Mounting method | Schraubgewinde |
|---|---|
| Clamping range min. | 8 mm |
| Clamping range max. | 13 mm |
| Operating temperature min. | -40 °C |
|---|---|
| Operating temperature max. | 85 °C |
| Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
|---|---|
| Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
