1. Trang chủ
  2. /
  3. Products
  4. /
  5. Helmholz
  6. /
  7. Hệ thống I/O TB20
  8. /
  9. Analog-input-module, 0 … 20 mA, 4 … 20 mA, ±20...
Analog-input-module 600-250-4AD01 - header

Analog-input-module, 0 … 20 mA, 4 … 20 mA, ±20 mA, 12 Bit Helmholz 600-250-4AD01

Helmholz Analog-input-module 600-250-4AD01 – mô-đun analog 4 kênh cho TB20

– 4 kênh ngõ vào analog: 0-20 mA/ 4-20 mA/ ±20 mA, 12 bit
– Có đèn LED cảnh báo màu đỏ
– Tháo lắp “nóng”

Helmholz Analog-input-module, 0 … 20 mA, 4 … 20 mA, ±20 mA, 12 Bit 600-250-4AD01 là mô-đun ngõ vào analog được sử dụng cho hệ thống I/O TB20

Analog-input-module 600-250-4AD01 - body

– 4 kênh ngõ vào analog: 0-20 mA/ 4-20 mA/ ±20 mA, 12 bit
– Có đèn LED cảnh báo màu đỏ
– Tháo lắp “nóng”

Helmholz Analog Input Module hotplug

Thông số kỹ thuật Helmholz Analog-input-module 600-250-4AD01

General information

  • Order number: 600-250-4AD01
  • Article name: AI 4x I, 0/4…20 mA, ±20 mA, 12-bit
  • Scope of delivery: AI 4x I, 0/4…20 mA, ±20 mA, 12-bit
  • Dimensions (DxWxH): 110 x 14 x 73 mm
  • Weight: 70 g
  • Number of inputs: 4
  • Power dissipation: 0.7 W
  • Hot-swap capable: Yes

Electrical isolation

  • from the backplane bus: Yes
  • Between the channels: No

Current draw

  • External: Not needed
  • Internal: 95 mA

Measuring

  • Measuring ranges / load resistance: 0 … 20 mA / 50 ohms,
  • 4 … 20 mA / 50 ohms,
  • ±20 mA / 50 ohms
  • Measuring method: Integration
  • Measurement resolution: 11 bit + sign
  • Interference frequency suppression: None | 10 Hz | 50 Hz | 60 Hz | 400 Hz
  • Refresh rate / conversion rate: Number of active channels x conversion time + 16 ms for wire break detection when activated.
  • The conversion time will depend on the interference frequency suppression:
    • None: 8 ms
    • 400 Hz: 45 ms
    • 60 Hz: 109 ms
    • 50 Hz: 128 ms
    • 10 Hz: 342 ms
  • Diagnoses: Upper measuring range limit exceeded (overflow), lower measuring range limit fallen below (underflow), wire break (for 4 … 20 mA only), parameter assignment error
  • Process alarms: Upper and lower limit per channel

Error limits

  • Operational error limit in the entire temperature range: ±0.5 % relative to the nominal range
  • Basic error limit at 25 °C: ±0.3 % relative to the nominal range
  • Temperature error: ±0.005 %/K relative to the nominal range
  • Linearity error: ±0.05 %/K relative to the nominal range
  • Repeating accuracy in steady state at 25 °C: ±0.05 %/K relative to the nominal range
  • Parameter configuration length: 22 bytes
  • General error indicator: Red LED
  • General error indicator: Red LED

Ambient conditions

  • Ambient temperature: 0 °C … +60 °C
  • Transport and storage temperature: -20 °C … +80 °C
  • Relative air humidity: 95 % r H without condensation
  • Protection rating: IP 20
  • Certifications: CE, UL

UL

  • Surrounding Air Temperature: 0 °C … +60°C
  • Pollution degree: 2

CE

  • Noise immunity: DIN EN 61000-6-2 “EMC Immunity”
  • Interference emission: DIN EN 61000-6-4 “EMC Emission”
  • Vibration and shock resistance: DIN EN 60068-2-6:2008 „Vibration“, DIN EN 60068-2-27:2010 „Shock”
  • RoHS: Yes
  • REACH: Yes

Flyer, TB20 IO-system for numerous applications

Helmholz Analog-input-module 600-250-4AD01 – TB20 Manual Modules