Mô-đun I/O phân tán PROFIsafe ET 200S 4/8 F-DI 6ES7138-4FA04-0AB0 của Siemens
– 8 đầu vào, 4 đầu ra digital 24VDC
– Safety:
● acc. to EN 954 4
● Performance level according to ISO 13849-1 e
● SIL acc. to IEC 61508
Mô-đun I/O phân tán PROFIsafe ET 200S 4/8 F-DI 6ES7138-4FA04-0AB0: Là mô-đun tín hiệu ngõ vào/ ra an toàn mạng Profinet thuộc series ET 200S của Siemens
– 8 đầu vào, 4 đầu ra digital 24VDC
– Safety:
● acc. to EN 954 4
● Performance level according to ISO 13849-1 e
● SIL acc. to IEC 61508
Kích thước (W x H x D): 30 x 81 x 52 mm
Thông số kỹ thuật – Mô-đun I/O phân tán PROFIsafe ET 200S 4/8 F-DI 6ES7138-4FA04-0AB0
| Supply voltage | ||
| Rated value (DC) | 24 V | |
| Reverse polarity protection | No | |
| Encoder supply | ||
| Number of outputs | 2 | |
| Type of output voltage | min. L+ (-1.5 V) | |
| Short-circuit protection | Yes; Electronic (response threshold 0.7 A to 1.8 A) | |
| Output current | ||
| ● Rated value | 300 mA | |
| ● permissible range, lower limit | 0 mA | |
| ● permissible range, upper limit | 300 mA | |
| Power loss | ||
| Power loss, typ. | 4 W | |
| Address area | ||
| Address space per module | ||
| ● Inputs | 6 byte | |
| ● Outputs | 4 byte | |
| Digital inputs | ||
| Number of digital inputs | 8; 8 single channel, 4 two-channel | |
| Input characteristic curve in accordance with IEC 61131, type 1 | Yes | |
| Input voltage | ||
| ● Type of input voltage | DC | |
| ● Rated value (DC) | 24 V | |
| ● for signal “0” | -30 to +5 V | |
| ● for signal “1” | +15 to +30 V | |
| Input current | ||
| ● for signal “1”, typ. | 3.7 mA | |
| Input delay (for rated value of input voltage) | ||
| for standard inputs | ||
| — parameterizable | Yes | |
| — at “0” to “1”, min. | 0.3 ms | |
| — at “0” to “1”, max. | 17 ms | |
| — at “1” to “0”, min. | 0.3 ms | |
| — at “1” to “0”, max. | 17 ms | |
| Cable length | ||
| ● shielded, max. | 200 m | |
| ● unshielded, max. | 200 m | |
| Encoder | ||
| Connectable encoders | ||
| ● 2-wire sensor | No | |
| Interrupts/diagnostics/status information | ||
| Diagnostics function | Yes | |
| Alarms | ||
| ● Diagnostic alarm | Yes | |
| Diagnoses | ||
| ● Diagnostic information readable | Yes | |
| ● Short-circuit | Yes | |
| Diagnostics indication LED | ||
| ● Group error SF (red) | Yes | |
| ● Status indicator digital input (green) | Yes | |
| Potential separation | ||
| Potential separation digital inputs | ||
| ● between the channels | No | |
| ● between the channels and backplane bus | Yes | |
| ● Between the channels and load voltage L+ | No | |
| Isolation | ||
| Isolation tested with | 500 V DC | |
| Standards, approvals, certificates | ||
| Highest safety class achievable in safety mode | ||
| ● acc. to EN 954 | 4 | |
| ● Performance level according to ISO 13849-1 | e | |
| ● SIL acc. to IEC 61508 | SIL 2 (single-channel), SIL 3 (two-channel) | |
| Dimensions | ||
| Width | 30 mm | |
| Height | 81 mm | |
| Depth | 52 mm | |
| Weights | ||
| Weight, approx. | 78 g | |
