Cáp 7m 2 đầu nối M12 male 0° / M12 female 90° A-code LED 4 chân 7000-40341-6340700
– PUR 4×0.34 bk UL/CSA+drag ch. 7m
– Có cáp dài 7m
– M12 đực thẳng(0°) – M12 cái (90°) 4 chân, A-code
– IP65, IP66K, IP67
Cáp 7m 2 đầu nối M12 male 0° / M12 female 90° A-code LED 4 chân 7000-40341-6340700 là đầu chuyển đổi giữa M12 đực thẳng(0°) 4 chân, A-code với M12 cái (90°) 4 chân, A-code, lý tưởng cho các môi trường công nghiệp đòi hỏi sự khắt khe
(PUR 4×0.34 bk UL/CSA+drag ch. 7m)
– Có sẵn cáp dài 7 mét
– Có 3 đèn LED (PNP), (NPN) theo yêu cầu
– M12 đực thẳng(0°) – M12 cái (90°) 4 chân, A-code
– Vỏ nhựa có khả năng chống chịu hóa chất và dầu tốt
Thông số kỹ thuật – Cáp 7m 2 đầu nối M12 male 0° / M12 female 90° A-code LED 4 chân 7000-40341-6340700
| Cable length | 7,00 m |
Side 1
| Family construction form | M12 |
| Coding | A |
| Gender | male |
| Mounting method | inserted, screwed |
| Threaded hole | M12 x 1 |
| Tightening torque | 0,6 Nm |
| Width across flats | SW13 |
| Cable outlet | straight |
| suitable for corrugated tube (internal Ø) | 10 mm |
| Material | PUR |
| Degree of protection (EN IEC 60529) | IP67, IP66K, IP65 |
Side 2
| Family construction form | M12 |
| Coding | A |
| Gender | female |
| Mounting method | inserted, screwed |
| Threaded hole | M12 x 1 |
| Tightening torque | 0,6 Nm |
| Width across flats | SW13 |
| Cable outlet | angled |
| suitable for corrugated tube (internal Ø) | 10 mm |
| Material | PUR |
| Degree of protection (EN IEC 60529) | IP67, IP66K, IP65 |
Electrical data | Supply
| Operating voltage DC | 24 V |
| Operating voltage DC min. | 18 V |
| Operating voltage DC max. | 30 V |
| Current operating per contact max. | 4 A |
| Operating voltage DC max. (UL-listed) | 30 V |
Diagnostics
| Status indication LED | green, yellow, white |
Installation | Connection
| Mounting set | M12 x 1 |
Device protection | Electrical
| Additional condition protection degree | inserted, screwed |
| Pollution Degree | 3 |
| Rated surge voltage | 0,8 kV |
| Material group (IEC 60664-1) | I |
Mechanical data | Material data
| Material screw connection | Zinc die-casting |
| Coating of fitting | nickel plated |
| Locking material | Zinc die-casting |
| Coating locking | Nickeled |
Mechanical data | Mounting data
| Mounting method | inserted, screwed, Shaking protection |
Environmental characteristics | Climatic
| Operating temperature min. | -30 °C |
| Operating temperature max. | 85 °C |
| Additional condition temperature range | depending on cable quality |
Important installation notes
| Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
| Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
Conformity
| Product standard | EN IEC 61076-2-101 (M12) |
