Đầu nối 3 chân M8 male 0° A-code 7000-08601-0000000
– Đầu nối ren ngoài M8 thẳng, 3 cực
– Tiết diện kết nối: 0.14 … 0.5 mm²
– IP67
Đầu nối 3 chân M8 male 0° A-code 7000-08601-0000000: Đầu nối cảm biến công nghiệp của Murrelektronik, dùng để đấu nối cáp tín hiệu cho cảm biến (sensor)/ actuator
– Đầu nối ren ngoài M8 thẳng, 3 cực
– Tiết diện kết nối: 0.14 … 0.5 mm²
– IP67
THÔNG SỐ KỸ THUẬT -Đầu nối 3 chân M8 male 0° A-code 7000-08601-0000000
Header
| Material short text | M8 STECKER GER. 2,5..5 3pol. |
Side 1
| Family construction form | M8 |
| No. of poles | 3 |
| Width across flats | SW13 |
| Material contact | Brass |
| Coating contact | gold plated |
| Degree of protection (EN IEC 60529) | IP67 |
Electrical data | Supply
| Operating voltage AC max. | 50 V |
| Operating voltage DC max. | 60 V |
| Current operating per contact max. | 4 A |
Installation
| Connection cross section min. | 0.14 mm² |
| Connection cross section max. | 0.5 mm² |
Installation | Connection
| Connection | Screw terminals SK |
Installation | Pin assignment
| Coding | A |
Device protection | Electrical
| Additional condition protection degree | inserted, screwed |
| Pollution Degree | 3 |
| Overvoltage category (EN 60664-1) | III |
| Overvoltage category (EN 60950-1) | II |
| Insulation resistance min. | 100 mΩ |
Mechanical data | Material data
| Material housing | PBT |
| Material contact carrier | PA66 |
Mechanical data | Mounting data
| Height | 45 mm |
| Width | 13.5 mm |
| Depth | 13.5 mm |
| Clamping range min. | 2.5 mm |
| Clamping range max. | 5 mm |
Environmental characteristics | Climatic
| Operating temperature min. | -40 °C |
| Operating temperature max. | 85 °C |
Important installation notes
| Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
| Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
