Cáp 0.6m 2 đầu nối M8 male 0° / M8 female 0° A-code 4 chân 7000-88011-6310060
– Đầu nối thẳng đực – đầu nối thẳng cái
M8 – M8, 4 cực Mã
– Lỗ ren: M8 x 1
– IP67, IP66K, IP65
Cáp 0.6m 2 đầu nối M8 male 0° / M8 female 0° A-code 4 chân 7000-88011-6310060: Cáp cảm biến/actuator công nghiệp có sẵn đầu nối M8 của Murrelektronik, dùng để nối tín hiệu giữa cảm biến/actuator và bộ điều khiển PLC hoặc module I/O trong hệ thống tự động hóa
– Đầu nối thẳng đực – đầu nối thẳng cái
M8 – M8, 4 cực Mã
– Lỗ ren: M8 x 1
– IP67, IP66K, IP65
THÔNG SỐ KỸ THUẬT – Cáp 0.6m 2 đầu nối M8 male 0° / M8 female 0° A-code 4 chân 7000-88011-6310060
Header
| Material short text | MSFL0-H-T631_0.6 |
| Cable length | 0,60 m |
Side 1
| Family construction form | M8 |
| No. of poles | 4 |
| Coding | A |
| Gender | male |
| Mounting method | inserted, screwed |
| Threaded hole | M8 x 1 |
| Tightening torque | 0,4 Nm |
| Width across flats | SW9 |
| Cable outlet | straight |
| suitable for corrugated tube (internal Ø) | 6,5 mm |
| Material | PUR |
| Material contact | Copper alloy |
| Coating contact | gold plated |
| Degree of protection (EN IEC 60529) | IP67, IP66K, IP65 |
Side 2
| Family construction form | M8 |
| No. of poles | 4 |
| Coding | A |
| Gender | female |
| Mounting method | inserted, screwed |
| Threaded hole | M8 x 1 |
| Tightening torque | 0,4 Nm |
| Width across flats | SW9 |
| Cable outlet | straight |
| suitable for corrugated tube (internal Ø) | 6,5 mm |
| Material | PUR |
| Material contact | Copper alloy |
| Coating contact | gold plated |
| Degree of protection (EN IEC 60529) | IP67, IP66K, IP65 |
Electrical data | Supply
| Operating voltage AC max. | 50 V |
| Operating voltage DC max. | 60 V |
| Current operating per contact max. | 4 A |
Diagnostics
| Status indication LED | No |
Device protection | Electrical
| Degree of protection (EN IEC 60529) | IP67, IP68, IP66K, IP65 |
| Additional condition protection degree | inserted, screwed |
| Pollution Degree | 3 |
| Rated surge voltage | 1,5 kV |
| Material group (IEC 60664-1) | I |
Mechanical data | Material data
| Material housing | PUR |
| Locking material | Zinc die-casting |
| Coating locking | Nickeled |
| Material gasket | FKM |
Mechanical data | Mounting data
| Mounting method | inserted, screwed, Shaking protection |
Environmental characteristics | Climatic
| Operating temperature min. | -30 °C |
| Operating temperature max. | 85 °C |
| Additional condition temperature range | depending on cable quality |
Important installation notes
| Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
| Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
Conformity
| Product standard | EN IEC 61076-2-114 (M8) |
