Bộ điều khiển nhiệt độ 48x48mm ngõ ra 4-20mA ACS-13A-A/M
– Điều khiển PID
– Có nhiều lựa chọn đầu vào: TC, RTD, DC dòng và áp
– Ngõ ra điều khiển: 4-20 mA
– Kích thước 48×48 mm (W×H)
– Nguồn cấp 100-240 V AC
– Chống nước/ chống bụi IP66 (mặt trước đồng hồ)
Bộ điều khiển nhiệt độ 48x48mm ngõ ra 4-20mA ACS-13A-A/M: Một bộ điều khiển nhiệt độ (temperature controller) thuộc dòng ACS của Shinko Technos
– Điều khiển PID
– Có nhiều lựa chọn đầu vào: TC, RTD, DC dòng và áp
– Ngõ ra điều khiển: 4-20 mA
– Kích thước 48×48 mm (W×H)
– Nguồn cấp 100-240 V AC
– Chống nước/ chống bụi IP66 (mặt trước)
THÔNG SỐ KỸ THUẬT – Bộ điều khiển nhiệt độ 48x48mm ngõ ra 4-20mA ACS-13A-A/M
Model
| ＡＣＳ-１３Ａ | ACS-13A（W48×H48×D62mm） | ||||||
| Control output
(OUT1) |
Ｒ | Relay contact 1a | |||||
| Ｓ | Non-contact voltage (for SSR drive) | ||||||
| Ａ | Direct current | ||||||
| Input | Ｍ | Multi-input | |||||
| Power supply voltage | 100 to 240V AC＊ | ||||||
| １ | 24V AC/DC | ||||||
|
Option |
A2 | Alarm 2 | |||||
| C5 | Serial communication (EIA RS-485) | ||||||
| DR | Heating/Cooling control (relay output) | OUT2 | |||||
| DS | Heating/Cooling control (SSR output) | ||||||
| SM | Set value memory external selection | ||||||
| W (20A) | Rated current: Single-phase 20A | Heater burnout Alarm | |||||
| W (50A) | Rated current: Single-phase 50A | ||||||
| W3 (20A) | Rated current: 3-phase 20A | ||||||
| W3 (50A) | Rated current: 3-phase 50A | ||||||
Rated range (Full multi-range)
| Input type | Input range | ||
|
Thermocouple |
Ｋ | －200 to 1370 ℃ | －320 to 2500 °F |
| －200.0 to 400.0℃ | －320.0 to 750.0 °F | ||
| Ｊ | －200 to 1000 ℃ | －320 to 1800 °F | |
| Ｒ | 0 to 1760 ℃ | 0 to 3200 °F | |
| Ｓ | 0 to 1760 ℃ | 0 to 3200 °F | |
| Ｂ | 0 to 1820 ℃ | 0 to 3300 °F | |
| Ｅ | －200 to 800 ℃ | －320 to 1500 °F | |
| Ｔ | －200.0 to 400.0℃ | －320.0 to 750.0 °F | |
| Ｎ | －200 to 1300 ℃ | －320 to 2300 °F | |
| PL-Ⅱ | 0 to 1390 ℃ | 0 to 2500 °F | |
| C(W/Re5-26) | 0 to 2315 ℃ | 0 to 4200 °F | |
| RTD | Pt100 | －200 to 850 ℃ | －320 to 1500 °F |
| －200.0 to 850.0℃ | －320.0 to 1500.0°F | ||
| JPt100 | －200 to 500 ℃ | －320 to 900 °F | |
| －200.0 to 500.0℃ | －320.0 to 900.0 °F | ||
| Direct current | 4 to 20mA DC |
－2000 to 10000 |
|
| 0 to 20mA DC | |||
| DC voltage | 0 to 1V DC | ||
| 0 to 10V DC | |||
| 1 to 5V DC | |||
| 0 to 5V DC | |||
Standard specification
| Display | PV display———– 11-segment Backlight LCD Red/ Green /Orange, Character size, 12.0 x 5.4mm (H x W)
SV display———– 11-segment Backlight LCD Green, Character size, 6.0 x 3.5mm (H x W) MEMO display—— 11-segment Backlight LCD Green, Character size, 4.8 x 2.8mm (H x W) Indicators————- Backlight Orange |
|
Input |
Thermocouple —- K, J, R, S, B, E, T, N, PL- Ⅱ, C (W/Re5-26) External resistance: 100Ω max., however, B input: 40Ω max. RTD——————- Pt100, JPt100: 3-wire type (Allowable input lead wire resistance: 10Ω max. per wire)
Direct current——- 0 to 20 mA DC, 4 to 20 mA DC: Input impedance: 50Ω , Allowable input current: 50 mA DC max. DC voltage———– 0 to 1 V DC: Input impedance 1 MΩ min. Allowable input voltage: 5 V DC max. Allowable signal source resistance: 2 kΩ max. 0 to 5 V DC, 1 to 5 V DC, 0 to 10 V DC: Input impedance: 100 kΩ min. Allowable input voltage: 15 V DC max. Allowable signal source resistance: 100Ω max. |
|
Accuracy (Setting・Indication) |
Thermocouple—————- Within ±0.2% of each input span ±1digit, or within ±2℃ (4°F), whichever is greater
However, R, S input, the range is 0 to 200℃ (32 to 392°F): Within ±6℃ (12°F) B input, the range is 0 to 300℃ (32 to 572°F): The accuracy is not guaranteed. K, J, E, T, N input, less than 0℃ (32°F): Within ±0.4% of input span ±1digit RTD—————————– Within ±0.1% of each input span±1digit, or within ±1℃ (2°F), whichever is greater Direct current, DC voltage — Within ±0.2% of each input span±1digit |
| Input sampling period | 250 ms |
| Control output (OUT1) | Relay contact———— 1a, control capacity: 3 A 250 V AC (resistive load), 1 A 250 V AC (inductive load cosø=0.4), Electrical life: 100,000 cycles
Non-contact voltage — 12 V DC ±15% Max. 40 mA DC (short circuit protected) Direct current ———– 4 to 20 mA DC Load resistance: Max. 550Ω |
|
Control action |
The following actions can be selected by keypad. (Factory default: PID)
PID (with auto-tuning function), PI, PD (with auto-reset function), P (with auto-reset function), ON/OFF OUT1 proportional band (P)———- 0 to 1000℃ (2000°F), 0.0 to 1000.0℃ (1999.9°F), or 0.0 to 100.0%(ON/OFF control when set to 0 or 0.0) Integral time (I)—————————- 0 to 1000 seconds (OFF when set to 0) Derivative time (D)———————– 0 to 300 seconds (OFF when set to 0) OUT1 ON/OFF action—————— When the proportional band is set to 0 or 0.0 OUT1 proportional cycle————— 1 to 120 seconds (Not available for Direct current output type) ARW——————————————- 0 to 100% OUT1 ON/OFF action hysteresis — 0.1 to 100.0℃ (°F) or 1 to 1000 OUT1 high limit————————— 0 to 100% (Direct current: -5 to 105%) OUT1 low limit—————————– 0 to 100% (Direct current: -5 to 105%) |
|
Alarm 1 output |
Alarm types can be selected by keypad. (Factory default: No alarm action)
・No alarm action ・High limit alarm (Deviation setting) Setting range: －(Input span) to Input span ・Low limit alarm (Deviation setting) Setting range: －(Input span) to Input span ・High/Low limits alarm (Deviation setting) Setting range: 0 to Input span ・High/Low limit range alarm (Deviation setting) Setting range: 0 to Input span ・Process high alarm Setting range: Input range low limit value to Input range high limit value ・Process low alarm Setting range: Input range low limit value to Input range high limit value ・High limit with standby alarm (Deviation setting) Setting range: －(Input span) to Input span ・Low limit with standby alarm (Deviation setting) Setting range: －(Input span) to Input span ・High/Low limits with standby alarm (Deviation setting) Setting range: 0 to Input span Setting accuracy——- Same as indication accuracy Action——————— ON/OFF action Hysteresis————– 0.1 to 100.0℃ (°F) or 1 to 1000 Output——————— Relay contact 1a, Control capacity: 3 A 250 V AC (Resistive load), Electrical life: 100,000 cycles |
| Supply voltage | 100 to 240 V AC 50/60 Hz (Allowable voltage fluctuation range: 85 to 264 V AC)
24 V AC/DC 50/60 Hz (Allowable voltage fluctuation range: 20 to 28 V AC/DC) |
| Power consumption | Approx. 8VA |
| Insulation resistance | 10 MΩ min., at 500 V DC |
| Dielectric strength | Between Input terminal and Power terminal: 1.5 kV AC for 1 minute Between Output terminal and Power terminal: 1.5 kV AC for 1 minute |
| Environment | Ambient temperature: 0 to 50℃ Ambient humidity: 35 to 85 %RH (non-condensing),Drip-proof/Dust-proof IP66 (for front panel only) |
| Safety standards | UL: Power input rating 100-240 V AC, 24 V AC/DC File No. E159038 |
| Case (Material, Color) | Material: Flame resistant resin Color: Black |
| Mounting method | Mounting frame (Mountable control panel thickness: 1 to 5 mm) |
| Setting method | Sheet key input |
| External dimensions | W48 x H48 x D62 mm (Depth of control panel interior when the gasket is used: 54.5 mm) |
| Weight | Approx. 120g |
| Attached functions | Power failure countermeasure, Self-diagnosis, Automatic cold junction temperature compensation (only for thermocouple), Burnout,
Input error indication, Indication range, Control range, Warm-up indication, Auto/Manual control switching, Console communication |
| Accessories included | Mounting frame 1 piece, Gasket A (Front mounted to the ACS-13A) 1 piece Instruction manual (A3 unfolded, English/Japanese) 1 copy
CT (Current transformer): CTL-6-S-H: 1 piece [W (20A) option], CTL-12-S36-10L1U: 1 piece [W (50A) option] CTL-6-S-H: 2 pieces [W3 (20A) option], CTL-12-S36-10L1U: 2 pieces [W3 (50A) option] |
| Accessories sold separately | Terminal cover (TC-ACS), USB communication cable CMA (to which the Console software SWS-ACS01M is attached) |
Optional specifications
When ordering, please specify an option code according to the userʼs needs.
| Alarm 2 output [A2 option] | Alarm type, setting range and output type, etc. are the same as those of Alarm 1. See Alarm 1 output section. If this option is ordered, Heating/Cooling control (D□ option) cannot be ordered.
This option and Heater burnout alarm (W, W3 option) utilize common output terminals. |
|
Heater burnout alarm [W, W3 option] (CT included) |
Rating——————– Single-phase 20 A [W(20A)], Single-phase 50 A [W(50A)], 3-phase 20 A [W3(20A)], 3-phase 50 A [W3(50A)]
Must be specified. Setting range———- Rated current 20 A [W(20A), W3(20A)]: 0.0 to 20.0 A Rated current 50 A [W(50A), W3(50A)]: 0.0 to 50.0 A Setting accuracy—– Within ±5% of the rated value Action——————– ON/OFF action Output——————– Relay contact 1a, Control capacity: 3A 250V AC (resistive load), Electrical life: 100,000 cycles If this option is ordered, Heating/Cooling control (D□ option) cannot be ordered. |
|
Heating/Cooling control [D□ option] |
Heating control action: Same as the control output (OUT1) Cooling control action
OUT2 proportional band (P) — 0.0 to 10.0 times OUT1 proportional band (ON/OFF action when set to 0.0) OUT2 integral time (I)————- Same as that of OUT1 OUT2 derivative time (D)——– Same as that of OUT1 OUT2 proportional cycle——— 1 to 120 seconds Overlap/Dead band—————- Thermocouple, RTD: -100.0 to 100.0℃ (°F) Direct current, voltage: -1000 to 1000 (The placement of the decimal point follows the selection.) OUT2 hysteresis ——————- 0.1 to 100.0℃ (°F), or 1 to 1000 OUT2 cooling method————- One cooling method can be selected from Air cooling (linear characteristic), Oil cooling (1.5th power of the linear characteristic) and Water cooling (2nd power of the linear characteristic) by keypad. Output———————————- Relay contact 1a, Control capacity: 3A 250V AC (resistive load), Electrical life: 100,000 cycles Non-contact voltage 12 V DC±15% Max. 40 mA DC (short circuit protected) If this option is ordered, Alarm 2 (A2 option) and Heater burnout alarm (W, W3 option) cannot be ordered. |
|
Serial communication [C5 option] |
Various operations (such as Reading and setting of various set values, Reading of PV and action status and Function change) can be performed from an external PC.
Communication line—————— EIA RS-485 Communication method————- Half-duplex communication Synchronization method———— Start-stop synchronization Communication speed————— 2400/4800/9600/19200 bps (Selectable by keypad) Data bit /Parity ———————- Data bit: 7 or 8, Parity: Even/Odd /No parity (Selectable by keypad) Stop bit———————————— 1 or 2 (Selectable by keypad) Communication protocol———— Shinko protocol/Modbus ASCII/Modbus RTU (Selectable by keypad) Number of connectable units—– Max. 31 units per host computer Communication error detection — Parity, checksum, LRC (Modbus ASCII), CRC-16 (Modbus RTU) Data format
If this option is ordered, Set value memory external selection (SM option) cannot be ordered. |
|
Set value memory external selection [SM option] |
SV1, SV2, SV3 or SV4 can be selected by the external contact. The MEMO display indicates the selected memory number.
Contact input terminal DI2 can be used for ʻSet value memory external selectionʼ or for ʻOUT/OFF external selectionʼ in [Contact input function] in Setup mode. If ʻAuto/Manual control functionʼ is selected in [OUT/OFF key function] in Setup mode, externally Auto/Manual control can be switched. Circuit current when closed: Approx. 12 mA If this option is ordered, Serial communication (C5 option) cannot be ordered. |
