Cáp mạng 10m bọc chống nhiễu có 2 đầu nối M8 male 0° A-cod. / RJ45 male 0° 7000-89721-7911000
– Là đầu nối thẳng, M8 – RJ45, có sẵn cáp dài 10m
– M8, 4 chân, A-code
– Inserted, screwed
– IP65, IP66K, IP67
Cáp mạng 10m bọc chống nhiễu có 2 đầu nối M8 male 0° A-cod. / RJ45 male 0° 7000-89721-7911000: là đầu nối thẳng, đầu nối chuyển đổi giữa M8 (4 chân, A-cod, đực) với RJ45 (4 chân, Ethernet CAT5)
– PUR 1x4xAWG26 shielded gn UL/CSA+drag ch. 10m
– Có sẵn cáp dài 10m, có bọc chống nhiễu
Thông số kỹ thuật – Cáp mạng 10m bọc chống nhiễu có 2 đầu nối M8 male 0° A-cod. / RJ45 male 0° 7000-89721-7911000
| Material short text | MSRAL0-H-*791_10.0 |
|---|---|
| Cable length | 10,00 m |
| Family construction form | M8 |
|---|---|
| No. of poles | 4 |
| Coding | A |
| Gender | male |
| Mounting method | pluggable, inserted, screwed |
| Threaded hole | M8 x 1 |
| Tightening torque | 0,4 Nm |
| Width across flats | SW9 |
| Cable outlet | straight |
| suitable for corrugated tube (internal Ø) | 8,5 mm |
| Degree of protection (EN IEC 60529) | IP67, IP66K, IP65 |
| Family construction form | RJ45 |
|---|---|
| No. of poles | 4 |
| Mounting method | pluggable |
| Cable outlet | straight |
| Degree of protection (EN IEC 60529) | IP20 |
| Operating voltage DC max. | 60 V |
|---|---|
| Current operating per contact max. | 1,5 A |
| Transfer parameters | CAT5, Class D (ISO/IEC 11801:2002), (EN 50173-1) |
|---|
| Pollution Degree | 3 |
|---|---|
| Rated surge voltage | 1 kV |
| Material group (IEC 60664-1) | I |
| Material housing | PUR |
|---|---|
| Color housing | Black |
| Color contact carrier | green |
| Locking material | Brass |
| Coating locking | nickel plated |
| Mounting method | inserted, screwed, Shaking protection |
|---|
| Operating temperature min. | -30 °C |
|---|---|
| Operating temperature max. | 85 °C |
| Additional condition temperature range | depending on cable quality |
| Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
|---|---|
| Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
| Product standard | EN/IEC 61076-2-104 (M8), EN IEC 60603-7 (RJ45) |
|---|
