Bộ chuyển đổi giao tiếp Profibus/ AS-i 556612 của Murrelektronik: là một thiết bị dùng để kết nối mạng Profibus-DP với mạng AS-Interface (AS-i)
– Gateway-Singlemaster
– AS-i/PROFIBUS DP interface
– AS-i Specification 2.1

– Điện áp: 30 V DC
Bộ chuyển đổi giao tiếp Profibus/ AS-i 556612 của Murrelektronik
– Gateway-Singlemaster
– AS/PROFIBUS DP interface
– AS-i Specification 2.1
– Điện áp: 30 V DC
– IP20
Bộ chuyển đổi giao tiếp Profibus/ AS-i 556612 của Murrelektronik: là một thiết bị dùng để kết nối mạng Profibus-DP với mạng AS-Interface (AS-i)
– Gateway-Singlemaster
– AS-i/PROFIBUS DP interface
– AS-i Specification 2.1

– Điện áp: 30 V DC
Thông số kỹ thuật – Bộ chuyển đổi giao tiếp Profibus/ AS-i 556612 của Murrelektronik
| Material short text | Gateway PB-DP/AS-i, 1 Master 3.0 IP20 |
|---|
| Rated operating current AS-Interface max. | 200 mA |
|---|
| Operating voltage DC | 30 V |
|---|
| Address range default setting | 3 |
|---|---|
| Address setting type | Buttons, PROFIBUS |
| Address range min. | 1 |
| Address range max. | 126 |
| Automatic baudrate detection | yes |
| Baud rate min. | 9.6 kBaud |
| Baud rate max. | 12 MBaud |
| AS-i specification | V2.11 |
|---|---|
| Number of slaves max. | 62 |
| Diagnostic interface serial | PS2/RS232 |
| Cycle time AS-i | 150 µs × (number of slaves + 2) |
| PROFIBUS function | Illustration of AS-Interface slaves as I/O process data in PROFIBUS DP, full diagnostic configuration via DP-master |
|---|
| Family construction form | SUB-D9 |
|---|
| Degree of protection (EN IEC 60529) | IP20 |
|---|---|
| Rated insulation voltage | 500 V |
| Number of operating buttons | 4 |
|---|---|
| Function operating buttons | Mode, Set, OK, ESC |
| Height | 120 mm |
|---|---|
| Width | 75 mm |
| Depth | 83 mm |
| Mounting method | geschnappt |
| Suitable for mounting type | (EN 60715), mounting rail |
| Operating temperature min. | 0 °C |
|---|---|
| Operating temperature max. | 55 °C |
| Storage temperature min. | -20 °C |
| Storage temperature max. | 85 °C |
| EMC | EN 50081 |
|---|---|
| Low Voltage Directive | EN 50295 |