Cáp 2m có 2 đầu nối M12 male 0° / M12 female 0° A-code 4 chân 7000-40021-6340200
– M12 đực (0°) – M12 cái(0°), 4 chân, A-code, chiều dài cáp 2 mét
– PUR 4×0.34 bk UL/CSA+drag ch. 2m
– Inserted, screwed
– IP67, IP66K, IP65
Cáp 2m có 2 đầu nối M12 male 0° / M12 female 0° A-code 4 chân 7000-40021-6340200 là dây cáp kết nối loại M12, gồm đầu đực (thẳng 0°) và cái (thẳng 0°), 4 chân, A-coded
(PUR 4×0.34 bk UL/CSA+drag ch. 2m)
Có sẵn cáp dài 2 mét, chịu dầu và chống hóa chất tốt.
Phù hợp cho robot tự động hóa, chịu uốn, kéo tốt.
Sản phẩm tương tự – Đầu nối M12 – M12
Thông số kỹ thuật – Cáp 2m có 2 đầu nối M12 male 0° / M12 female 0° A-code 4 chân 7000-40021-6340200
Header
| Material short text | MSBL0-A-T634_2.0 |
| Cable length | 2.0 m |
Side 1
| Family construction form | M12 |
| No. of poles | 4 |
| Coding | A |
| Gender | male |
| Mounting method | inserted, screwed |
| Thread | M12 x 1 |
| Tightening torque | 0.6 Nm |
| Width across flats | SW13 |
| Cable outlet | straight |
| suitable for corrugated tube (internal Ø) | 10 mm |
| Material | PUR |
| Degree of protection (EN IEC 60529) | IP67, IP66K, IP65 |
Side 2
| Family construction form | M12 |
| No. of poles | 4 |
| Coding | A |
| Gender | female |
| Mounting method | inserted, screwed |
| Thread | M12 x 1 |
| Tightening torque | 0.6 Nm |
| Width across flats | SW13 |
| Cable outlet | straight |
| suitable for corrugated tube (internal Ø) | 10 mm |
| Material | PUR |
| Degree of protection (EN IEC 60529) | IP67, IP66K, IP65 |
Electrical data | Supply
| Operating voltage AC max. | 250 V |
| Operating voltage DC max. | 250 V |
| Current operating per contact max. | 4 A |
Diagnostics
| Status indication LED | no |
Installation | Connection
| Mounting set | M12 x 1 |
Device protection | Electrical
| Additional condition protection degree | inserted, screwed |
| Pollution Degree | 3 |
| Rated surge voltage | 2.5 kV |
| Material group (IEC 60664-1) | I |
Mechanical data | Material data
| Color contact carrier | green |
| Material screw connection | Zinc die-casting |
| Coating of fitting | nickel plated |
| Locking material | Zinc die-casting |
| Coating locking | Nickeled |
Mechanical data | Mounting data
| Mounting method | inserted, screwed, Shaking protection |
Environmental characteristics | Climatic
| Operating temperature min. | -30 °C |
| Operating temperature max. | 85 °C |
| Additional condition temperature range | depending on cable quality |
Important installation notes
| Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
| Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
Conformity
| Product standard | DIN EN 61076-2-101 (M12) |
