Đầu nối nguồn push-pull RJ45 male IDC 4 chân 7000-74041-0000000

Đầu nối nguồn push-pull RJ45 male IDC 4 chân 7000-74041-0000000

– Là đầu nối thẳng, male
– RJ45PP, 4 chân
– IDC terminals
– IP65, IP67

Đầu nối nguồn push-pull RJ45 male IDC 4 chân 7000-74041-0000000 là đầu nối thẳng, RJ45PP, male (đực), 4 chân, công nghệ kết nối nhanh gọn, tiện lợi, an toàn

( 4-pol., 0,14 – 0,34mm², 4,5 – 11mm, shielded, CAT5)
– PROFINET, RJ45PP, 4 chân
– IDC terminals
– Tốc độ truyền tín hiệu: 100 MBit/s

Đầu nối nguồn push-pull RJ45 male IDC 4 chân 7000-74041-0000000 - detail

Thông số kỹ thuật – Đầu nối nguồn push-pull RJ45 male IDC 4 chân 7000-74041-0000000

Side 1

Family construction form	RJ45

Electrical data | Supply

Operating voltage DC max.	60 V
Current operating per contact max.	2 A

Industrial communication

Data transmission rate max.	100 MBit/s
Transfer parameters	CAT5, Class D (ISO/IEC 11801:2002), (EN 50173-1)

Industrial communication | Ethernet functionality

duplex	Full duplex

Installation

Connection cross section min.	0.14 mm²
Connection cross section max.	0.34 mm²
AWG number min.	26
AWG number max.	22

Device protection | Electrical

Degree of protection (EN IEC 60529)	IP67, IP65
Additional condition protection degree	inserted, screwed

Mechanical data | Mounting data

Clamping range min.	4 mm
Clamping range max.	11 mm

Environmental characteristics | Climatic

Operating temperature min.	-40 °C
Operating temperature max.	70 °C

Important installation notes

Note on bending radius	Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
Note on strain relief	Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.

Conformity

Product standard	IEC 61076-3-117 V.14