Đầu nối M12 đực, thẳng, A-code, IDC của Murrelektronik 7000-12533-0000000
– Là đầu nối thẳng, M12
– Male, 5 chân, A-cod.
– Kết nối IDC
– IP67
Đầu nối M12 cái, thẳng, A-code, IDC của Murrelektronik 7000-12533-0000000
(5-pol., 0,34 – 0,5mm², 4,7 – 6mm)
Thông số kỹ thuật – Đầu nối M12 cái, thẳng, A-code, IDC của Murrelektronik 7000-12533-0000000
Side 1
| Family construction form | M12 |
| Degree of protection (EN IEC 60529) | IP67 |
Electrical data | Supply
| Operating voltage AC max. | 50 V |
| Operating voltage DC max. | 50 V |
| Current operating per contact max. | 4 A |
Installation
| Connection cross section min. | 0,34 mm² |
| Connection cross section max. | 0,5 mm² |
| Single wire diameter min. | 0,1 mm |
Installation | Connection
| Wire insulation diameter min. | 1,2 mm |
| Wire insulation diameter max. | 2 mm |
Device protection | Electrical
| Additional condition protection degree | inserted, screwed |
Mechanical data | Mounting data
| Clamping range min. | 4,7 mm |
| Clamping range max. | 6 mm |
| Height | 52,4 mm |
| Width | 20,5 mm |
| Depth | 20,5 mm |
Environmental characteristics | Climatic
| Operating temperature min. | -25 °C |
| Operating temperature max. | 85 °C |
Important installation notes
| Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
| Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
