Future-proof investment in high-quality hardware with state-of-the-art technology
Fast startup, thanks to preconfigured HMI devices
-The compact, lightweight hand hydraulic punch driver makes it easy to punch holes into stainless V2A steel, mild steel
– Sheet thickness of 3 mm (V2A: 2 mm)
Rectangular and square punches and dies make it easy to punch holes into stainless steel (V2A versions), mild steel, aluminium or plastics with a max.
Sheet thickness of 3 mm (V2A: max. 2 mm). Available for cut-outs sizes of 10-, 16-, and 24- multi-pin heavy industrial connectors and also for numerous special cut-outs.
Self-centering knockout punches for stainless steel (V2A versions), mild steel, aluminium and plastic walls with max.
Sheet thickness of 3 mm (V2A: max. 2 mm). Punches available for cut-outs PG 16, M16, M20, M25, M32, M40, M50 and M63.
The patented cable entry system KEL ATEX enables the user to enter and seal (IP54) pre-terminated and standard cables.
The split grommet matching the cable diameter is placed around the cable and inserted into the cable entry frame.
The KEL-FL range enables simple, fast and flexible cable routing and sealing of flat wires, e.g. in lift construction.
Split or non-split inserts can be utilised. Innovative construction of the inserts compensates for manufacturing inconsistencies in flat cables.
The KDR-ESR is a one-piece plate to be assembled on cabinet bases. Slide frames for the KEL cable entry frames are already pre-assembled.
After fitting all cables into the KEL frames, they are easily and quickly inserted into the slide frames and fixed.
During maintenance, the KEL frames are removed without tools from the slide frames. Due to the combination KDR-ESR and KEL cable entry frames, a rating of IP54 is achieved (with correct selection of cable grommets).
The cabinet base plates KDR-BMP for Rittal enclosures TS8 can be used instead of the 3-piece standard base plates.
The base plates are as well installed with standard Rittal clips.
We supply complete flanged plates FP with 112 × 36 mm cut-outs for compact enclosures of the Rittal AE series.
The cut-outs, as well as the drilling template, conform to the standard cut-outs for 24-pole industrial connectors.
All flanged plates are RAL 7035 powder-coated. Please use the gaskets of the standard plates. Enclosures are supplied with gaskets and screws.
Parallel corrugated conduits for cable routeing are used where cables have to be protected from mechanical damage or certain weather conditions.
CONFiX WS-PA is a polyamide conduit for high mechanical requirements (e.g. engine compartments, car bodies, construction machines, ship building, rail transportation technology, switch cabinets).
CONFiX SH Conduit clips are a one-piece location system to provide secure mounting points for corrugated conduit systems.
The clips are secured to their mounting position through a central mounting point with a hexagonal counter-bore.
The EMC shield clamps SF|SKL are used for shielding single cables. Easy to use and effective in shielding of cables.
For assembly on 35 mm DIN rails.