IO-Link analog input converter

IO-Link analog input converter
Order code: 5000-00501-1300001

The IO-Link analog converter from Murrelektronik can be used to connect analog sensors and actuators easily to the IO-Link master.

IO-Link Analog Converter Features:

The quickest, easiest and most economical way to do this is by using the IO-Link analog converters from Murrelektronik. They convert the
analog signal to the IO-Link protocol. This allows a wide range of types of analog devices to be connected to an IO-Link master.

On-site installations

Installation directly on the sensor

Installation between IO-Link master and sensor

Installation directly on the IO-Link master

Website: Murrelektronik IO-Link

INPUT

Sensor supply US	24 V DC (EN 61131-2), max. 200 mA
Input range (analog)	0…20 mA, 4…20 mA, 0…10 V, -10…+10 V
Valency	348 nA, 348 nA, 179.4 µV, 358.9 µV
Input resistor (analog)	232 Ω, 232 Ω, > 100 kΩ, > 100 kΩ
Resolution (analog)	15 Bit + sign
Accuracy	0.10% (25 °C)
Temperature drift	45 ppm/°K
Conversion time (analog)	max. 5 ms
Input filter	yes, mean value formation, parameterizable N = 0…64
Invers-polarity protection	yes, permanently
Over voltage protection	30 V DC

CONNECTIONS

IO-Link	M12 (male) 5-pole, A-coded
Analog input	M12 (female) 5-pole, A-coded, shielded

MODULE SUPPLY

Operating voltage	24 V DC (18…30 V DC)
Current consumption	max. 19 mA

GENERAL DATA

Protection	IP65/IP67
Material (housing)	Plastic
Labeling	Laser labelled
Temperature range	-30…+70 °C (storage temperature -40…+85 °C)
Dimensions H×W×D	32.3×77.2×15 mm

IO-LINK

Specification	IO-Link V1.1
Operating modes	COM2 (38.4 kBit/s)
Port Class	A
Cycle time	min. 2.3 ms
Data width	16 Bit / 2 Byte
Data format	Siemens S7

PARAMETERIZATION

Measured value	Current/voltage
Diagnostics	2 Byte
lower limit	2 Byte
upper limit	1 Byte

PROTECTION

Reverse polarity protection module	yes, permanently
Short-circuit protection sensor	yes, permanently
feed back resistance	yes, permanently
Over voltage protection	30 V DC

DIAGNOSTIC

Communication status	via LED and IO-Link
Diagnostic via LED	yes
Diagnostic via IO-Link	yes
Monitoring – limit	yes
Monitoring – temperature	yes
Monitoring – over voltage	yes
Monitoring – under voltage	yes
Short-circuit and overload	yes
Underride and overrun	yes

COMMERCIAL DATA

country of origin	DE
customs tariff number	85389099
EAN	4048879588294
eClass	27242601
Packaging unit	1

Link:
IO-Link analog input converter

Art.No.: 5000-00501-1300001