Real-Time Ethernet Gateway netTAP 151
Loadable device for any Slave/Slave protocol combination
NT 151-RE-RE – 1722.122
netTAP 151
Data Converter for Real-Time Ethernet Networks
The gateway netTAP 151 transmits IO data bidirectionally between any two industrial Real-Time Ethernet networks.
- Bridging between any two Real-Time Ethernet networks
- Flexible choice of operating modes Slave/Master or Slave/Slave
- Effortless integration as standard IO device
- Secure network segregation via internal data buffer
- Fast conversion time less than 10 milliseconds
Specifications
| Product | Part number | 1722.122 |
| Brief description | Gateway Real-Time Ethernet Slave to Real-Time Ethernet Slave | |
| Communication controller | Primary network X2 / Secondary network X3 | netX 51 / netX 100 |
| Integrated Memory | RAM | netX 51: 8 MB SDRAM, netX 100: 8 MB SDRAM |
| FLASH | netX 51: 4 MB serielles Flash, netX 100: 4 MB serielles Flash | |
| SD memory card (optional) | max. 2 GByte, do not use SDHC or SDXC card types | |
| Power supply | Supply voltage | 24 V DC ± 6 V |
| Current at 24 V (typically) | 190 mA | |
| Power consumption | 4.78 W | |
| Connector | MINI COMBICON, 5-pin | |
| Reverse voltage protection | yes | |
| Communication interface X2 | Communication standard | Ethernet |
| Interface type | 100BASE-TX, isolated | |
| Connector | 2 * RJ45 | |
| Auto negotiation | supported | |
| Auto cross over | supported | |
| Communication interface X3 | Communication standard | Ethernet |
| Interface type | 100BASE-TX, isolated | |
| Connector | 2 * RJ45 | |
| Auto negotiation | supported | |
| Auto cross over | supported | |
| Diagnostic interface | Type | USB |
| Connector | Mini-USB, 5-pin | |
| Displays | LED displays | SYS system status |
| APL application status | ||
| COM0, COM1, COM2, COM3 protocol specific communication status | ||
| 4 x LINK (RJ45) | ||
| 4 x ACT (RJ45) | ||
| Permitted ambient conditions | Ambient temperature range for operation | If distance to neighboring devices is minimum 17.5 mm: -20 … +60°C; If housing has contact to neighboring device (and if surface temperature of neighboring device does not exceed +70°C): -20 … +50°C |
| Humidity | 10 … 95 %, no condensation permitted | |
| Device | Dimensions (L x W x H) | 113.6 mm x 22.6 mm x 99 mm (without connector) |
| Weight | 121 g | |
| Degree of protection | IP20 | |
| Mounting | Top hat rail (DIN rail EN 60715) | |
| Configuration | Software | SYCON.net |
| Conformity | RoHS | Yes |
| Conformance with EMC directives | CE sign | Yes |
| ESD Air discharge (DIN EN 61000-4-2) | 8 kV (criterion A) | |
| ESD contact discharge (DIN EN 61000-4-2) | 6 kV (criterion A) | |
| Immunity: radiated, HF field (DIN EN 61000-4-3) 80 MHz … 3 GHz | 10 V/m (criterion A) | |
| Burst (DIN EN 61000-4-4) | 2.2 kV (criterion B) | |
| Surge (DIN EN 61000-4-5) | 1 kV (criterion A) | |
| Immunity: conducted (DIN EN 61000-4-6) 150 kHz … 80 MHz | 10 V/m (criterion A) | |
| Radio interference emission (DIN EN 55016-2-3) | 30 … 2000 MHz (criterion A) | |
| Radio interference voltage (DIN EN 55016-2-1) | 0.01 … 30 MHz (criterion A) |
NT 151-RE-RE – 1722.122